5A Upgrade Power Supply 4pin XLR 12V Adapter for Panasonic AC Adaptor AW-PS505a

Description

We are closed on Saturdays and Sundays.
New
HIGH POWER
®
High Efficiency
12V 5A 4-pin XLR AC to DC Power Adapter
with matching 3-prong AC power cord included
Input: 100-240 VAC +/- 10% full range
Input AC Inlet: IEC 320 3pin (Type C14) compatible with standard 3-prong grounded power cord (included).
Output Voltage: 12V DC
Ratings: 5A (60W)
CEC Efficiency Level: IV
Standby idle no load power consumption is less than 0.5 Watt
High efficiency switching technology with 83% efficiency
DC Cable length - 47.5" (120cm)
High efficiency switching technology with 83% efficency at full load
Fanless AC adapter operates in total silence.  Ideal power source for devices such as DVR, LCD monitor, etc.
Worldwide EMI & SAFETY APPROVAL: UL/cUL , TUV/GS, CE,  FCC, CCC, BSMI, DOIR +C-TICK, GOST-R, PSE, PSB, EK
Lead-FREE
Cadium-FREE
Mercury-FREE
Hexavalent chromium-FREE
PBB-FREE
PBDE flame retardants-FREE
RoHS Compliant - made with hazardous-free components
RoHS is the Restriction Of the use of certain Hazardous Substances in electrical and electronic equipment. This has been a standard in Europe and is now becoming a standard in the world. Not only lead, but cadium, mercury, hexavalent chromium, polybrominated biphenyl (PBB), and polybrominated diphenyl ether (PBDE) flame retardants are limited as well
Technical Specifications:
Universal input 100-240 VAC
High efficiency switching technology -- 83% typical @ full load
CEC Efficiency Level: IV
Single 12V output @ 5A  +- 5%
Load Regulation: +- 5% (11.4V - 12.6V)
DC Cable length - 47.5" (120cm) with UL rated 1185 AWG#18 cable
Over Current protection
Over Voltage protection
Short circuit protection
Open-Circuit Protection
100% HI-POT tested
100% cycling BURN-IN
Dimensions: 120 mm (L) * 60 mm (W) * 35mm (H)
Storage Environment:
Temperature:  -20 - 85 degree C
Humidity: 5 - 90 %
Altitude: From sea level to 40,000Ft
Operating Environment:
Temperature:  0 - 40 degree C
Humidity: 10 - 90 %
Altitude: From sea level to 10,000Ft
MTBF : > 30,000 hours at 80% load and 40 degree C ambient conditions
Input Fuse Rating: T3.15A/250V
Inrush Current at cold start, maximum load:
30A at 110 VAC
60A at 220 VAC
Line Regulation: This line regulation is less than ± 1%, @ full load .
Turn-ON Time: The output voltage should rise to 90% of +12V in less than 3 seconds from AC apply to 110VAC
No load power consumption is less than 0.5 Watt @ 230VAC/ 50Hz
DC Output Ripple/Noise: 2% max
Hi-Pot Tested: 4242 VDC at 5mA for 3 second between primary and secondary circuit
Insulation Tested: 500VDC for 3 seconds between primary and secondary circuit
Worldwide EMI & SAFETY APPROVAL: UL/cUL , TUV/GS, CE,  FCC, CCC, BSMI, DOIR +C-TICK, GOST-R, PSE, PSB, EK
Built-in power status indicator
Green LED turns steady on when there is a reliable 12V DC output.
LED flashes when there is a problem found by the internal detection circuitry.
LED turns off when there is no power output or no power input.
Store Policy & About us
(More on Shipping/ Return Policy / None-USA International Customers)